Builders Metalwork

This face fixed joist hanger is available in three sizes 38mm, 47mm or 50mm Joist widths. This product is made from Galvanized Mild Steel and conforms to EN10346:2015 and Euroclass A1. It works to a max joist height 100mm. It can be fitted using 3.75...

Wrap Over (adjustable) joist hanger that is made from Galvanized Mild Steel DX51D+Z275 to EN10346:2015. It's Fixing Hole Dimensions are 3.8mm with Fixing Type being 3.75 x 30mm Square Twisted Sherardized/Galvanised Nails. Fix using all nail holes to...

A standard leg joist hanger from Expamet, designed hold timber joists in place by wrapping around the joist. Install the product by fixing all nail holes to achieve stated loads, then ensure hanger is the correct size for joist. Any slack to be packed...

Debonding sleeve for use on plain-ended wall ties at vertical movement joints. Debonded Ties require 100mm embedment. A 120mm long sleeve will provide an allowance for movement and tolerance, and will be suitable for most applications.

JHA is a height adjustable joist hanger for supporting timber joists from timber members. It is available in standard leg (JHA270) and long leg (JHA450) versions and can be installed to the face of the carrying joist or wrapped over the top for higher...

Reinforcement Mesh is a popular product within the construction industry, due to its ability to strengthen concrete, particularly slabs, whilst reducing the potential for cracking. The steel mesh expands under different temperatures at the same levels as...

This 150 x 90mm Angle Bracket has a wing of length of 63mm Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Fixing Hole Dimensions 4mm (21) 9mm (4) 11mm (1) 11x30 Slot (2) . Brackets must be...

A screw-in tie supplied with a Nylon 8mm plug for joining new masonry to existing walls without the need for jointing, perfect for conservatories, extensions and garden walls. Simple and easy to install, this starter tie is suitable for use in brickwork...

This 150 x 150mm Angle Bracket has a wing of length of 63mm Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Fixing Hole Dimensions 4mm (20) 9mm (6) 11x30 Slot (2). Brackets must be used in...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant acoustic wall...

Wall ties must meet the acoustic performance requirements of ‘Type A’ as outlined in Approved Document E to be suitable for use in internal separating walls of new-build attached dwellings. Ancon Staifix HRT4 now has a Part E compliant acoustic wall...

Designed to fix brickwork or blockwork to timber-based structures up to a height of 15m. An example about be attaching a timber door or window frames directly to brickwork. The ties are screwed horizontally into the frame, surrounded by mortar and built...

Ancon Staifix PPS is a vertical movement joint Safety Wall Tie that allow for masonry / brickwork to expand and contract. Debonding sleeves are used on plain-ended wall ties at vertical movement joints that abut columns. The tie will restrain the masonry...

The Staifix RT2 20 pack is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

The Staifix RT2 is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

The Staifix RT2 is a general purpose wall tie that is suitable for cavities from 50mm to 150mm and can be used for domestic houses and small commercial buildings up to 15 metres in height. The RT2 has a measured dynamic stiffness of

The red Staifix Universal Insulation Retaining Clip (Uni) will fit all the standard stainless steel ties including HRT4 and RT2, in order to retain insulation to the inner leaf of the cavity wall.

Staifix Wire Balloons are a simple and effective way of keeping chimneys and downpipes clear from nesting birds, leaves and other debris. Available in a few sizes, wire balloons are manufactured from stainless steel or galvanised steel mesh and are...

Manufactured from cement that has been reinforced with glass fibre, the Mesh Spacer Triple Cover is designed to offer the same levels of strength and durability as concrete. The Spacer should be used vertically allowing the concrete to flow easily,...

Reinforcement Mesh is a popular product within the construction industry, due to its ability to strengthen concrete, particularly slabs, whilst reducing the potential for cracking. The steel mesh expands under different temperatures at the same levels as...

This galvanised mild steel Hip Iron is designed to provide decorative restraints to prevent ridged tile movement on hipped roofs. Where a ridge comes down at an angle, the iron is nailed to the joist before bedding the final tile, to prevent any slippage.

This 90 x 90mm Angle Bracket has a wing of length of 59mm Use 3.75x30 Square Twisted Nails to achieve stated loads, otherwise as suitable for substrate and hole size. Fixing Hole Dimensions 4mm (16) 9mm (4) 11mm (1) 11x30 Slot (1). Brackets must be used...

AB1006060 is a light duty L Shape Angle bracket timber connections. Fixing type is suitable for substrate and 5mm (20) 11mm (3) hole size. Brackets must be used in pairs to prevent eccentric loading. Use 4.0x40 Annular Ring Shank Nails to achieve...

AB12512542 is a light duty L shape Expamet Angle bracket for timber connections. Fixing type is suitable for substrate and 4mm (16) hole size. Brackets must be used in pairs to prevent eccentric loading.